Repositorio Colección INTI-SNRD

Título: SIM.EM-K3 : key comparison of 10 mH. Inductance standards at 1 kHz. Final report
Tipo documental: info:eu-repo/semantics/article; info:ar-repo/semantics/artículo; info:eu-repo/semantics/publishedVersion
Fuente: Metrología, 53
Autor/es: Izquierdo, D.; Moreno Hernández, José Ángel; Castro, Blanca Isabel; de Barros e Vasconcellos, Renata; Cazabat, Marcelo Horacio; Koffman, Andrew; Cote, Marcel
Materias: Sistema Interamericano de Metrología; Inductancia; Frecuencia; Inductores eléctricos; Metrología; Mediciones
Editor/Edición: IOP Publishing;2016
Licencia: https://creativecommons.org/licenses/by/3.0/
Afiliaciones: Izquierdo, D. Administración Nacional de Usinas y Trasmisiones Eléctricas (UTE); Uruguay
Moreno Hernández, José Ángel Centro Nacional de Metrología (CENAM); México
Castro, Blanca Isabel Instituto Costarricense de Electricidad (ICE); Costa Rica
de Barros e Vasconcellos, Renata Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); Brasil
Cazabat, Marcelo Horacio Instituto Nacional de Tecnología Industrial (INTI); Argentina
Koffman, Andrew National Institute of Standards and Technology (NIST); Estados Unidos
Cote, Marcel National Research Council (NRC); Canadá

Resumen: A key comparison of 10 mH inductance standards at 1 kHz has been carried out with the participation of seven National Metrology Institutes of the Inter-American Metrology System, within the frame of the International Committee for Weights and Measures Mutual Recognition Arrangement (MRA), which was piloted by CENAM, Mexico. Three previously characterized commercial inductors, contained in individual enclosures with controlled temperature were used as traveling standards. This document presents the results and technical details of the comparison.
Descargar
Ver+/-