Repositorio Colección INTI-SNRD

Título: Biodegradable PLA/PBAT/Clay Nanocomposites: Morphological, Rheological and Thermomechanical Behavior
Tipo documental: info:ar-repo/semantics/artículo; info:eu-repo/semantics/article; info:eu-repo/semantics/acceptedVersion
Fuente: Journal of Renewable Materials 2016, 4(4), 258-265
Autor/es: Correa Aguirre, Juan Pablo; Bacigalupe, Alejandro; Maggi, Jorge; Eisenberg, Patricia
Materias: Nanocompuestos; Biodegradabilidad; Ácido láctico
Editor/Edición: Scrivener Publishing LLC;2016
Licencia: https://creativecommons.org/licenses/by/4.0/
Afiliaciones: Correa Aguirre, Juan Pablo Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET); Argentina
Correa Aguirre, Juan Pablo Universidad Nacional de San Martín. Instituto de Investigación e Ingeniería Ambiental (UNSAM-3iA); Argentina
Bacigalupe, Alejandro. Universidad Nacional de San Martín. Instituto de Investigación e Ingeniería Ambiental (UNSAM-3iA); Argentina
Bacigalupe, Alejandro. Instituto Nacional de Tecnología Industrial. Caucho (INTI-Caucho); Argentina
Maggi, Jorge. Universidad Nacional de La Plata. Centro de Tecnología de recursos Minerales y Cerámica (UnLP-CETMIC); Argentina
Eisenberg, Patricia Universidad Nacional de San Martín. Instituto de Investigación e Ingeniería Ambiental (UNSAM-3iA); Argentina
Eisenberg, Patricia Instituto Nacional de Tecnología Industrial. Plásticos (INTI-Plásticos); Argentina

Resumen: Poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT)-based nanocomposites were prepared by melt blending of PLA and PBAT with 5 wt% of unmodified (Cloisite Na) and modified (Cloisite 30B) montmorillonites. X-ray diffraction (XRD) revealed an intercalated structure in both nanocomposites. The extent of the intercalation was higher for nanocomposites based on modified clays (OMMT) with chemical affinity with the polymer matrix. Rheological measurements have shown an increase in viscosity and a better degree of clay dispersion for nanocomposites containing OMMT. Nanocomposites with OMMT showed lower PBAT separated phase particle size and improvements in thermal stability, mechanical properties and water vapor barrier when compared with the neat blend. Finally, our results showed that the organically modified clay has a higher affinity than natural clay with the studied polymer blend.
Descargar
Ver+/-