Título: | Force standards comparison at 100 KN among national laboratories from Inter American Metrology System SIM |
Fuente: | IMEKO World Congress “Measurement in Research and Industry”, 21 |
Autor/es: | Villarroel Poblete, Juan Christian; Oliva C., Hernán; Soto Pinto, Luis Rubén; Cárdenas, Alejandro; Torres Guzmán, Jorge C.; Dajes, Arístides; Savarín, Alejandro |
Materias: | Sistema Interamericano de Metrología; Metrología; Calibración; Comparadores; Fuerza; Incertidumbre; Mediciones |
Editor/Edición: | 2015 |
Licencia: | info:eu-repo/semantics/openAccess; |
Afiliaciones: | Villarroel Poblete, Juan Christian. Instituto de Investigaciones y Control del Ejército (IDIC); Chile Oliva C., Hernán. Instituto de Investigaciones y Control del Ejército (IDIC); Chile Soto Pinto, Luis Rubén. Instituto de Investigaciones y Control del Ejército (IDIC); Chile Cárdenas, Alejandro. Centro Nacional de Metrología (CENAM); México Torres Guzmán, Jorge C. Centro Nacional de Metrología (CENAM); México Dajes, Arístides. Instituto Nacional de Metrología (INM); Colombia Savarín, Alejandro. Instituto Nacional de Tecnología Industrial (INTI); Argentina |
|
|
Resumen: | A force comparison was carried out among various laboratories from Inter American System (SIM), in order to estimate the level of agreement for the realization of the quantity and the uncertainty associated to its measurement. The comparison was carried out in the ranges of 50 and 100 kN in compression. In order to achieve best accuracy of the force transducer the measurement range started in 50% of the maximum transducer range. The results obtained, the deviations graphs that include the uncertainty for each laboratory are presented in this document. |
![]() |
Descargar |
Ver+/- |